Description

The all-new SPC9 was developed in response to a European contract that required a 9mm carbine with ergonomics and handling similar to the AR platform. It combines many of the advantages of the B&T APC9, MP5, and AR platforms into a single, highly adaptable platform. The SPC9 checks all the right boxes and is one of the lightest recoiling 9mm carbines on the market thanks to B&T's creative and efficient hydraulic buffer system. It is also well balanced, accurate, safe, and adaptable.

Features

• Barrel construction – The barrel is a cold hammer forged barrel that produces outstanding accuracy. When the first series of weapons were tested for accuracy, all weapons from the series were able to produce groups within 50mm at 30 meters with match grade 9mm ammo.
• Charging Handle(s) – Another unusual feature of this weapon is that it sports two different charging handle systems. One of these is the classic handle found on AR platforms while the other is a non-reciprocating, foldable charging handle above the barrel. This gives the operator the choice to use whatever manual of arms that is preferred. Both of these systems are ambidextrous for obvious reasons but the most significant reason is that the designer of the weapon is a left-handed shooter and is quite sensitive to such things.
• Stock and handgrip – The telescopic stock and handgrip of the weapon have been inspired by the classic AR platform. The stock has six positions but is also replaceable to any other AR type stock on the markets if the operator should so desire. The same goes for the pistol-grip. The weapon is delivered with a B&T produced pistol-grip but is replaceable by the operator to any other type of after-market product found. This includes Magpul, BCM or any other OEM producers on the market.
• NAR and M-LOK System – The weapon has both a NAR and M-LOK system for the positioning of lights, lasers, optics, brass catchers and handgrips. The NAR’s located are on the 12 and 6 o’clock positions while the M-LOK systems are on the lateral position. The SPC9 comes with a single M-LOK rail but others can be ordered.
• Lower Receiver – The lower is another unique feature which has its genesis from the B&T APC9. This is the same weapon that was awarded the US Army contract for the next generation Sub Compact Weapon (SCW). It accepts the well-known and very reliable B&T polymer magazines.
• European Safety system – The trigger system is the “European” trigger system in which the weapon can be placed on safe with the hammer forward and during the manipulation process. This is much safer than the classic AR system which the safety cannot be engaged unless the hammer is rearward. On safe, all the time is always a good policy.
• The trigger system – is a two-stage system that as opposed to the more common single stage system.
• The recoil is greatly reduced because of the unique hydraulic buffer system. This system will reduce the felt recoil big time. This hydraulic buffer system is pioneered by B&T on SMG or PCC platforms.

Specifications

• Thread pitch:Tri-Lug
• Barrel Length:9.1
• Twist rate:1:10
• Length:24.5/27.9
• Weight:5.9

Resources

B&T SPC9 Owner's Manual

B&T SPC9 Spec Sheet